Packaged Rooftop Units

Why Choose Packaged Rooftop Units?

Introduction to Packaged Rooftop Units

As a leading figure in the Commercial & Industrial HVAC-R industry, B.I.M.S., Inc. has cultivated a deep understanding of the complexities and nuances of heating, ventilation, and air conditioning systems. Among the vast array of solutions we provide, Packaged Rooftop Units hold a special place for their efficiency, versatility, and cost-effectiveness. Through our journey of over 45 years, we’ve seen firsthand the transformative impact these units can have on commercial spaces. This article will delve into the world of Packaged Rooftop Units, offering insights from our extensive experience.

Why Choose Packaged Rooftop Units?

Efficiency and Space Saving

Packaged Rooftop Units stand out for their all-in-one design. By consolidating all components into a single unit installed on the roof, these systems save valuable floor space, an asset for any business. This design also simplifies maintenance and repair, as all parts are accessible from one location. From our experience at B.I.M.S., Inc., clients appreciate the unobtrusive nature of these units, keeping their commercial spaces open and customer-friendly.

Cost-Effectiveness

Concerning upfront and operational costs, Packaged Rooftop Units are an economical choice. Their simplified design and installation process can lead to lower installation costs compared to split systems. Moreover, their efficiency can contribute to reduced energy bills, a benefit we’ve highlighted to our clients time and time again. It’s a win-win situation in terms of financial savings and environmental sustainability.

Key Features of Packaged Rooftop Units

Packaged Rooftop Units are celebrated for their versatility and adaptability, catering to a wide range of commercial needs. Some key features include:

  • Integrated heating and cooling functions, allowing for a comprehensive climate control solution.
  • Advanced filtration systems, enhancing indoor air quality — an aspect we prioritize for the well-being of your employees and clients.
  • Modular design, enabling easy expansion or customization as your business grows or needs change.
  • Energy-efficient models, with some units equipped with innovative technologies like variable speed fans and compressors, significantly reducing operational costs.

Considerations When Choosing Packaged Rooftop Units

While Packaged Rooftop Units offer numerous benefits, selecting the right unit requires careful consideration. Through our years of service, B.I.M.S., Inc. advises clients to consider the following:

Size and Capacity

It’s crucial to choose a unit that matches your space’s size and requirements. An undersized unit will struggle to maintain comfortable temperatures, while an oversized unit can lead to energy wastage. Our technicians are adept at calculating the precise needs of your facility, ensuring optimal comfort and efficiency.

Energy Efficiency

Opting for an energy-efficient model can lead to significant savings over the unit’s lifespan. We often suggest units with a high Seasonal Energy Efficiency Ratio (SEER) rating, indicating greater efficiency. This not only benefits your bottom line but also aligns with our commitment to promoting sustainable practices.

Climate Considerations

Your local climate plays a critical role in selecting an appropriate unit. For instance, a business in a region with extreme winters may require a unit with enhanced heating capabilities. Our expertise extends to tailoring recommendations based on climatic conditions, ensuring year-round comfort.

Installation and Maintenance

Professional Installation

Proper installation is paramount to realizing the full benefits of Packaged Rooftop Units. At B.I.M.S., Inc., our team of certified technicians ensures each unit is installed with precision, following manufacturer guidelines and local regulations to the letter. This attention to detail prevents common issues and prolongs the unit’s lifespan.

Maintenance

Regular maintenance is crucial for keeping Packaged Rooftop Units in top condition. Our comprehensive maintenance programs include periodic inspections, cleaning, and necessary adjustments, helping to prevent downtime and extend the life of the unit. Our clients have found that proactive maintenance significantly reduces emergency repair needs and operational costs.

Custom Solutions

Understanding that each business has unique needs, we offer customized installations and maintenance plans. Whether it’s adapting the unit for specific environmental requirements or scheduling maintenance around your business operations, our aim is to provide solutions that fit seamlessly into your workflow.

Emergency Services

Despite the best maintenance, emergencies can happen. Our emergency services ensure that any issues with your Packaged Rooftop Units are addressed promptly, minimizing any impact on your business. Our clients rest easy knowing that help is just a phone call away, 24/7.

Through our lens at B.I.M.S., Inc., Packaged Rooftop Units represent a blend of efficiency, innovation, and practicality. Their adaptability to various commercial contexts, coupled with the potential for significant cost savings, makes them an attractive choice for business owners. Our commitment to delivering quality service means we’re not just providers; we’re partners in optimizing your business environment. As we continue to navigate the advancements in HVAC technology, our focus remains on empowering our clients with the knowledge and solutions that best meet their needs. When considering Packaged Rooftop Units, think of B.I.M.S., Inc. as your guide to a successful installation and beyond.

Installation and Maintenance

What is the difference between a packaged unit and a rooftop unit?

Here’s a good way to understand it — all rooftop units are essentially packaged units, but not all packaged units are installed on rooftops. A packaged unit combines all components, including the compressor, fans, and evaporator, into a single cabinet. This contrast sharply with split systems, where components are divided between an indoor and outdoor unit. The advantage of a rooftop unit, a type of packaged unit, lies in its installation location. By placing it on the roof, it saves precious floor space and reduces noise pollution inside the building. In my years of experience, I’ve found that rooftop units are particularly favored in commercial settings for these reasons.

How much does it cost to put a rooftop unit?

This question comes up a lot, and rightly so. The cost of installing a rooftop unit can vary widely due to factors like the unit’s size, efficiency rating, and the complexity of the installation. Generally speaking, you’re looking at a range from a few thousand dollars for smaller units to tens of thousands for larger, more sophisticated systems. It’s also crucial to factor in potential modifications to the roof itself to accommodate the unit. I always recommend getting a detailed quote based on a thorough assessment of your specific needs. Remember, opting for a more efficient unit might cost more upfront but can lead to significant savings on energy bills over time.

What is the primary control of a packaged rooftop unit?

The heartbeat of a packaged rooftop unit is its control system. This system governs everything from temperature settings to fan speeds. Many modern units come equipped with sophisticated controls that offer programmable settings, remote monitoring, and diagnostics capabilities. This allows for adjustments to be made for optimal performance and energy efficiency. One of the most significant advancements I’ve seen is the integration of smart technology, enabling units to adapt to changing conditions automatically or be controlled remotely via mobile devices. It’s a game-changer for ensuring comfort while managing energy consumption effectively.

What are the different types of rooftop units?

Rooftop units come in various shapes and sizes, each designed with specific applications in mind. The most common distinction is between cooling-only units, heat pumps that can provide both heating and cooling, and gas/electric units that combine electric cooling with gas heating. Within these categories, you’ll find units with varying levels of energy efficiency, cooling capacities, and features such as variable speed fans and advanced filtration systems. It’s fascinating to see how technology has evolved, allowing for customization to meet the exact needs of a business. Whether it’s accommodating a small shop or a sprawling office complex, there’s a rooftop unit that fits the bill.

Why should a business opt for energy-efficient rooftop units?

In my experience, the benefits of choosing energy-efficient rooftop units are twofold: cost savings and environmental impact. Energy-efficient models often come with a higher SEER (Seasonal Energy Efficiency Ratio) rating, meaning they use less power to cool the same space as older, less efficient models. Over time, the savings on electricity bills can be substantial, effectively paying back the initial investment. Moreover, reducing energy consumption is a responsible choice for the environment, helping businesses lower their carbon footprint. I’ve had numerous clients express satisfaction at not only cutting costs but also contributing positively to the planet’s well-being.

How can businesses ensure that their rooftop unit is tailored to their specific needs?

This is where the importance of professional consultation and installation cannot be overstated. Every business has unique needs based on its size, layout, and usage patterns. An expert can conduct a detailed assessment to determine the most suitable unit, considering factors like local climate, building insulation, and even the direction the building faces. This customized approach ensures that you’re not over or underestimating your cooling and heating requirements, which can lead to inefficiencies and discomfort. At B.I.M.S., Inc., we pride ourselves on offering solutions that are as unique as the businesses we serve. It’s not just about installing a unit; it’s about understanding a client’s needs and delivering a solution that meets them perfectly.

Resources

  • ENERGY STAR – Packaged Rooftop Units – Learn about ENERGY STAR certified rooftop units that are designed to save energy and reduce greenhouse gas emissions.
  • EPA – Rooftop Units – Explore information from the Environmental Protection Agency on rooftop units, including regulations and best practices for energy efficiency.
  • AHRI – Rooftop Units – Access resources from the Air-Conditioning, Heating, and Refrigeration Institute related to rooftop unit standards and certifications.
Close
24 Hour Emergency Service! (833) 879-2467
Search